Water Filter Location:
The water filter location for the Samsung RF29DB9900QD refrigerator is inside the refrigerator compartment. see samsung bespoke fridge rf29db9900qd water filter location.
Water Filter Part Number:
We think the water filter part number for the Samsung RF29DB9900QD refrigerator is HAF-QIN. To be entirely sure, check your old water filter to ensure you are using the correct one.
Based on the information in the user manual(pages 82 and 83) for the SAMSUNG RF29DB9900QD refrigerator:
Replacement Steps:
- Shut off the main water supply: Locate the valve on the water line connected to the refrigerator and turn it off.
- Open the filter cartridge cover: Locate the water filter at the top of the inside fridge compartment, and open the filter cartridge cover, which usually flips down.
- Unlock the old filter: Grasp the knob of the old filter cartridge and rotate it counter-clockwise 90 degrees (about 1/4 turn). The filter will be unlocked at this point.
- Remove the old filter: Carefully pull the old water filter cartridge out.
- If the filter is very dirty or brutal to remove, you may need to use a little force.
- To prevent water from leaking from the port, try to keep the filter straight as you pull it out.
- Insert the new filter: Push the new water filter cartridge into the slot. Ensure it is a genuine Samsung or approved replacement filter.
- Lock the new filter: Rotate the knob clockwise until the new filter is fully locked into place.
- Close the cover: Close the filter cartridge cover.
- Turn on the main water supply: Turn the main water supply valve back to the “on” position.
- Flush the lines: Dispense several gallons of water (the manual suggests flushing for approximately 5-6 minutes, equivalent to about 3 gallons) to remove air and impurities from the water line. The water may spurt briefly or appear misty or cloudy initially; this is normal.
- Reset the filter indicator: Reset the water filter replacement indicator on the refrigerator’s display panel.
- Tap “Fridge Manager” on the home screen, go to “Fridge Settings,” select “Water Filter,” and then tap “Reset.”